XCG-CG510 | ||
B&W | ||
Image Size | 5.1 Mega | |
Image Sensor | 2/3-type CMOS Image sensors with a global shutter function (Pregius | |
Number of Effective Pixels (H x V) | 2,464 × 2,056 | |
Cell Size (H x V) | 3.45 μm × 3.45 μm | |
Standard Output Pixels (H x V) | 2,448 × 2,048 | |
Colour Filte | ||
Frame Rate | 23 fps (8 bit, Mono) | |
Minimum Illuminatio | 0.5 lx(Iris: F1.4, Gain: +18 dB, Shutter: 1/23 s) | |
Sensitivity | F8 (400 lx, Gain: 0 dB, Shutter: 1/23 s) | |
SNR | More than 50 dB (Lens close, Gain: 0 dB, 8 bit) | |
Gain | Auto,Manual : 0 dB to 18 dB | |
Shutter Speed | Auto, Manual : 60 to 1/100,000 s | |
White Balance | ||
Camera features | ||
Readout Modes | Normal, Partial scan | |
Readout Features | LUT (Binarization, Gamma (Arbitrary value settable)), Test pattern | |
Synchronization | Hardware trigger, Software trigger, PTP (IEEE1588) | |
Trigger Modes | OFF (Free run), ON (Edge detection, Trigger width detection), Special trigger (Burst trigger, Bulk trigger, Sequential trigger, Free set sequence) | |
Userset | 16 | |
User Memory | 64 bytes × 16 c | |
Partial Scan | W (Pixel) | 16 to 2,464 |
H (Line) | 16 to 2,056 | |
GPO | EXPOSURE/Strobe/Sensor lead out/Trigger through/Pulse generation signal/User defined 1, 2, 3 (Output switching) | |
Other Features | Area gain, Defect correction, Shading correction, Temperature readout, LUT, 3 x 3 filter | |
Interface | ||
Video Data Output | digital Mono8, 10, 12 bit(at the time of shipment 8 bit) | |
Digital Interface | Gigabit Ethernet (1000BASE-T/100BASE-TX) | |
Camera Specification | GigE Vision® Version 2.0/1.2 | |
Digital I/O | ISO IN (x1), TTL IN/OUT (x2, selectable) | |
General | ||
Lens Moun | C mount | |
Flange Back | 17.526 mm | |
Power Requirement | DC +12 V (10.5 V to 15.0 V), IEEE802.3af (37 V to 57 V) | |
Power Consumption | DC+12V 3.0 W (max.) | |
EEE802.3af 3.7 W (max.) | ||
Operating Temperature | -5°C to +45°C (23°F to 113°F) | |
Performance Guarantee Temperatur | 0°C to 40°C (32°F to 104°F) | |
Storage Temperature | -30°C to +60°C (-22°F to +140°F) | |
Operating Humidity | 20% to 80% (no condensation) | |
Storage Humidity | 20% to 95% (no condensation) | |
Vibration Resistance | 10 G (20 Hz to 200 Hz 20 minutes for each direction -x, y, z ) | |
Shock Resistance | 70 G | |
Dimensions (W x H x D) | 29 × 29 × 42 mm (excluding protrusions) 1 3/16 × 1 3/16 × 1 11/16 inches (excluding protrusion) | |
Mass | Approx. 65 g (Approx. 2.3 oz) | |
MTBF | 62,042 hours (Approx. 7.1 years) | |
Regulations | UL60950-1, FCC Class A, CSA C22.2-No.60950-1, IC Class A Digital Device, CE : EN61326 (Class A), AS EMC: EN61326-1, VCCI Class A, KCC,CISPR22/24+IEC61000-3-2/-3 | |
Supplied Accessories | Lens mount cap (1), Operating instructions (1) |