Mésas Ópticas

Ficha técnica
Descargar Documentación
Comentarios

Mesas ópticas (optic tables - workstations)

SOmos los ditribuidores en Portugsl y España del experto alemán en mesas completas y tableros ópticos Opta GmbH

Tableros de las mesas ópticas

Indíquenos sus necesidades para realizar la oferta mása adecuada. Los tableros de las mesas ópticas están disponibles en cuatro tipos:

HD

Núcleo: rejilla de acero
Cobertura Superior: acero inoxidable magnético, sin orificios de montaje

HDT

Núcleo: rejilla de acero
Cobertura Superior: acero inoxidable magnético, con orificios de montaje

HS

Núcleo: relleno mineral de gran rigidez y densidad
Cobertura Superior: acero inoxidable magnético, sin orificios de montaje

HST

Núcleo: relleno mineral de gran rigidez y densidad

Cobertura Superior: acero inoxidable magnético, con orificios de montaje

Especificaciones de los tableros

Top Plate

Stainless steel 3 + 2mm
Magnetic or antimagnetic
Planarity +/-0,1mm
Brushed finish
Hole Spacing 25 mm
Insert Mounting Holes M6
With overlap 8 mm

Bottom Plate

Stainless steel 3 mm
Magnetic or antimagnetic
With overlap

Main Core

HD/T

magnetic: Honeycomb structure formed from 0.5 mm galvanised iron plates/jointed with special synthetic resin adhesives.
antimagnetic: Special aluminium core

HS/T

Mineral filling, reinforced with steel

Sealed Mounting Holes

Floating mounted threads M6
Magnetic or antimagnetic
No connection to the breadboard core because of sealed sockets
Possible displacement of mounting threads around 0,5 mm with simultaneous inclination around ± 3°
Max. thread depth 30 mm

Sides

Black laminated steel
Magnetic or antimagnetic

Tabletop Thickness

Customer requirements
Special sizes (up to L3000 x B1500 mm) without extra charge
Connecting of two tables possible with special table-connecting-system is possible
Special forms available on request
Possible with laser port

Soportes de la mesas ópticas

Pueden tanto rígidos como antivibratorios.

Support systems can be ordered as freestanding isolators or tie bar connected. The table support itself is offered in three different version and the legs can be equipped with different footings.

Support System without Vibrations Isolation

Rigid Table Support
Type LMT
(Levelling Mount Table)

The table top is fixed to the support system. Levelling screws which have a resonant frequency above 10Hz are installed between table legs and table feet to compensate for unevenness in the laboratory floor.

Support System with Low-Frequency Vibration Isolation

Vibration Isolated Table Top
Type RMT
(Rubber Mount Table)

Reinforced elastomeric shock absorbers make the connection between table top and support system. The resonant frequency of these systems lie between 2,5 and 5 Hz.

Support System with Low-Frequency Vibration Isolation

Vibration Isolated Table Top
Type DMT
(Diaphragm Mount Table)

In this case the table support system uses the legs as air cambers. The tabletop rests upon club-shaped diaphragm mounts.

This results in the system having an effective isolation against vibration in the floor. The vertical resonant frequency of this support is lower than 0,85 Hz. In the instance of floor vibrations of resonance greater than 8Hz the degree of isolation will be more than 90%.

Various level-control systems are available for both RMT and DMT support systems.

Si lo desea, en vez de mesas ópticas completas con soportes, también podemos ofrecerles una amplia gama de tableros ópticos.

Sé el primero en escribir tu opinión !