facebook

KP-M30

Imaging device1/3-inch interline CCD
 Total pixelsEIA: 811 (H)×508 (V) CCIR: 795 (H)×596 (V)
Effective pixelsEIA: 768 (H)×494 (V) CCIR: 752 (H)×582 (V)
Pixel sizeEIA: 6.35 µm (H)×7.4 µm (V)
CCIR: 6.5 µm (H)×6.25 µm (V)
Sensing areaEIA: 4.88 mm (H)×3.66 mm (V)
CCIR: 4.89 mm (H)×3.64 mm (V)
Scanning frequencyHorizontal; EIA:15.734KHz, CCIR:15.625KHz Vertical; EIA: 59.94Hz , CCIR: 50Hz
Sync systemInternal/external (auto selection)
Lens mountC mount (Flange focal distance=17.526 mm
Video output1.0Vp-p 75Ω Un-baranced Video: 0.7Vp-p
sync : 0.3Vp-p negative
Horizontal resolutionEIA:5 70TV Line CCIR: 560TV Line
Sensitivity200 lx (F4, Max. gain, 3200K)
Minimum illumination0.3 lx (F1.4, AGC, Gamma ON)
Signal noise to ratio60 dB (Min. gain)
External sync inputSwitchable by external switch
Input; HD/VD 4 to 6V DC negative, frequency deviation: ±1%, Impedance: 75Ω or high impedance
Output; HD/VD 5V DC negative, Impedance: 100Ω
Electric shutter1/50 (CCIR), 1/60 (EIA), 1/100 (CCIR), 1/120 (EIA), 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 second.
OFF is normal exposure
Gammaγ = 1 or adjustable
Accumulate modeFiled of flame accumulate
Power supply voltage12 ± 1 VDC
Power consumptionApprox. 1.4 W
AmbientOperation–10 to 50 °C (+14 to +122 °F) , less than 90 % RH
Storage–20 to 60 °C (–4 to +140 °F) , less than 70 % RH
Vibration endurance98 m/s² (Acceleration: constant 10 to 200 Hz, sweep: 10 minutes, XYZ 30 minutes)
Shock endurance686 m/s² (Drop test, once each top, bottom, left and right)
External dimensions29 (W)×29 (H)×38.5 (D) mm (Not including protrusions)
MassApprox. 55 g

Escribe tu opinión

KP-M30

KP-M30

Monochrome, Interace, 1/3inch
No. of effective pixels:EIA: 768 (H) × 494 (V) / CCIR: 752 (H) × 582 (V)
External dimensions:29 × 29 × 38.5mm, Mass:55g

Escribe tu opinión

Desarrollado por Opcionalia