facebook

KP-F33

Imaging device1/3-inch interline CCD
 Total pixels692 (H)×504 (V)
Effective pixels659 (H)×494 (V)
Pixel size7.4 µm (H)×7.4 µm (V) (square lattice)
Sensing area4.88 mm (H)×3.66 mm (V)
Aspect ratio4 : 3
Frame rate30 frames per second
Horizontal scanning frequency15.734 kHz
Vertical scanning frequency29.97 Hz
Sync systemInternal/external (auto selection)
Lens mountC mount (Flange focal distance=17.526 mm
Video output1.0Vp-p 75Ω Un-barances
Video: 0.7Vp-p
Sync : 0.3Vp-p negative
Horizontal resolution500 TV Line
Sensitivity400 lx (F8, with IR cut filter, 3200K)
Minimum illumination0.5 lx (F1.4, Max. gain, without IR cut filter)
Signal noise to ratio50 dB
External sync inputSwitchable by external switch
Input; HD/VD 4 to 6V DC negative, frequency deviation: ±1%, Impedance: 75Ω or high impedance
Output; HD/VD 5V DC negative, Impedance: 100Ω
Electric shutter1/125, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/25000 second.
OFF is normal exposure (frame rate:)
Gammaγ = 1
Frame on demand(A) Fixed shutter
(B) ONE trigger mode
(C) Reset control mode
(D) Partial scan mode (option)
Power supply voltage12 ± 1 VDC
Power consumptionApprox. 1.8 W
AmbientOperation–10 to 50 °C (+14 to +122 °F) , less than 90 % RH
Storage–20 to 60 °C (–4 to +140 °F) , less than 70 % RH
Vibration endurance98 m/s² (Acceleration: constant) 10 to 200 Hz, sweep: 10 minutes, XYZ 30 minutes
Shock endurance686 m/s² (Drop test, once each top, bottom, left and right)
External dimensions29 (W)×29 (H)×38.5 (D) mm (Not including protrusions)
MassApprox. 55 g

Escribe tu opinión

KP-F33

KP-F33

Monochrome, Progressive, 1/3inch
No. of effective pixels:VGA (659 (H) × 494 (V))
Frame rate:30 fps
External dimensions:29 × 29 × 38.5mm, Mass:55g

Escribe tu opinión

Desarrollado por Opcionalia