facebook

1029 NM SLM Nanosecond Laser

1029 nm nanosecond SLM laser module is a turnkey laser featuring single frequency operation, extremely high pulse-to-pulse stability yet in a very compact package. High pulse energy and pulse-on-demand operation make this laser suitable for sorting, illumination, and pump-probe spectroscopy applications.

SLM operation ensures high pulse-to-pulse stability, low jitter, and extremelly stable harmonic generation.

SPECIFICATIONS

ParameterMinimum ValueTypical ValueMaximum Value
 Central Wavelength, nm10291029.51030
 Longitudinal modes-single-
 Spectral line width FWHM, pm0.50.8 11
 Output power, mW-As per request300
 Central wavelength stability, pm (per hour, at stable body temperature)-12
 Pulse duration, ns1.5310
 Repetition rate, kHz (depending on pulse energy)-As per request35
 Pulse energy, µJ-As per request35
 Power stability, % (RMS, 8 hrs)-0.5 21
 Pulse-to-pulse stability, % RMS-25
 Transversal modes-TEM00-
 Beam Diameter at Aperture (1/e2), mm-1-
 Beam divergence (full angle), mrad-11.1
 M2 effective-1.11.2
 Polarization direction-Horizontal 3-
 Polarization contrast-better than 500:1-
 Control interface type-UART/USB-
 Operation mode-APC (CW)-
 Input voltage, VDC-5-
 External power supply requirement-+5 V DC, 5A-
 Dimensions (L-W-H), mm-50 x 30 x 16 4-
 Beam height from the base, mm-10.4-
 Heat-sinking requirement, °C/W-<0.5-
 Optimum heatsink temperature, °C-20-
 Warm up time, mins (cold start)-10-
 Temperature stabilization-Yes-
 Overheat protection-Yes-
 Storage temperature, °C (non-condensing)---
 Net weight, kg-0.29-
 Max. power consumption, W-14 (10000)-
 Warranty, months (op. hrs)-14 (10000) 5-
 RoHS-Yes-
 CE compliance-- General Product Safety Directive (GPSD) 2001/95/EC 
- (EMC) Directive 2004/108/EC
-
 Laser Safety Class-3B-
 OEM lasers are not compliant with-IEC60825-1:2014 (compliant using additional accessories)-
1 Measured with a scanning Fabry-Perot interferometer having 7.5 Mhz resolution, with scanning frequency of about 10 Hz. Interferometer testing is not provided for each laser being manufactured, the standard test is OSA measurement with 10-20 pm resolution instead.
2 Long term power test is carried out using an optical power meter with an input bandwidth of 10 Hz. Actual measurement rate has a period of about 20 seconds to 1 minute.
3 For lasers without integrated optical isolators.
4 Excluding control interface pins and an output window/fiber assembly.
5 Whichever occurs first. The laser has an integrated operational hours counter.

Accessories available:

- RS232 control interface for Matchbox AM-C3
- 25 W Power Supply (European Power cable) AM-P1
- Compact cooler for Matchbox 2 AM-H8
- Cooler for Matchbox 2 AM-H3
- Replacement adapter for Coherent CUBE type of Lasers AM-H6
- Replacement adapter for Coherent OBIS type of Lasers AM-H5

Potential applications of 1029 nm Nanosecond SLM Lasers: Seeding high power fiber lasers | seeding optical parametric amplifiers | supercontinuum generation | UV generation

In this video, you will see the capabilities and different options for the Matchbox lasers:

If you work with lasers, remember the following sections:
Laser protection and safety
Laser power and energy measurement

Write your review

1029 NM SLM Nanosecond Laser

1029 NM SLM Nanosecond Laser

1029 nm nanosecond SLM laser module is a turnkey laser featuring single frequency operation, extremely high pulse-to-pulse stability yet in a very compact package. High pulse energy and pulse-on-demand operation make this laser suitable for sorting, illumination, and pump-probe spectroscopy applications.

Write your review

Desarrollado por Opcionalia