facebook

KP-M20

Imaging device 1/2-inch interline CCD
  Total pixels EIA: 811 (H)×508 (V) CCIR: 795 (H)×596 (V)
Effective pixels EIA: 768 (H)×494 (V) CCIR: 752 (H)×582 (V)
Pixel size EIA: 8.4 µm (H)×9.8 µm (V)
CCIR: 8.6 µm (H)×8.3 µm (V)
Sensing area EIA: 6.45 mm (H)×4.84 mm (V)
CCIR: 6.47 mm (H)×4.83 mm (V)
Scanning frequency Horizontal; EIA:15.734KHz, CCIR:15.625KHz Vertical; EIA: 59.94Hz , CCIR: 50Hz
Sync system Internal/external (auto selection)
Lens mount C mount (Flange focal distance=17.526 mm
Video output 1.0Vp-p 75Ω Un-baranced Video: 0.7Vp-p
sync : 0.3Vp-p negative
Horizontal resolution EIA:5 70TV Line CCIR: 560TV Line
Sensitivity 200 lx (F4, Max. gain, 3200K)
Minimum illumination 0.3 lx (F1.4, AGC, Gamma ON)
Signal noise to ratio 60 dB (Min. gain)
External sync input Switchable by external switch
Input; HD/VD 4 to 6V DC negative, frequency deviation: ±1%, Impedance: 75Ω or high impedance
Output; HD/VD 5V DC negative, Impedance: 100Ω
Electric shutter 1/50 (CCIR), 1/60 (EIA), 1/100 (CCIR), 1/120 (EIA), 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 second.
OFF is normal exposure
Gamma γ = 1 or adjustable
Accumulate mode Filed of flame accumulate
Power supply voltage 12 ± 1 VDC
Power consumption Approx. 1.4 W
Ambient Operation –10 to 50 °C (+14 to +122 °F) , less than 90 % RH
Storage –20 to 60 °C (–4 to +140 °F) , less than 70 % RH
Vibration endurance 98 m/s² (Acceleration: constant 10 to 200 Hz, sweep: 10 minutes, XYZ 30 minutes)
Shock endurance 686 m/s² (Drop test, once each top, bottom, left and right)
External dimensions 29 (W)×29 (H)×38.5 (D) mm (Not including protrusions)
Mass Approx. 55 g

Write your review

KP-M20

KP-M20

Monochrome, Interace, 1/2inch
No. of effective pixels:EIA: 768 (H) × 494 (V) / CCIR: 752 (H) × 582 (V)
External dimensions:29 × 29 × 38.5mm, Mass:55g

Write your review

Desarrollado por Opcionalia